headerphoto

Volume 44, No 2, 2022


Contents:

Comparative Investigations on Microstructure and Slurry Abrasive Wear Resistance of NiCrBSi and NiCrBSi-WC Composite Hardfacings Deposited on 304 Stainless Steel
Vivek D. Kalyankar, Sachin P. Wanare
Tribology in Industry, Vol. 44, No. 2, pp. 199-211, 2022
DOI: 10.24874/ti.1075.03.21.05

Microstructure and Wear Resistance of Plasma Surface Layers Based of Alloy Mixture CuSn10/CrxCy
Andrey Evgenievich Balanovskiy, Van Trieu Nguyen,
Natalia Anatolyevna Astafeva, Van Huy Vu
Tribology in Industry, Vol. 44, No. 2, pp. 212-220, 2022
DOI: 10.24874/ti.1083.03.21.07

Optimization of Plasma Spraying Parameters with Respect to Shear Adhesion Strength of Cr3C2-NiCr Coating on 16Mn Steel
Dang Xuan Thao, Hoang Van Got, Pham Duc Cuong
Tribology in Industry, Vol. 44, No. 2, pp. 221-229, 2022
DOI: 10.24874/ti.1101.04.21.09

Microstructural Characterization, Residual Stress, and Mechanical Properties of Plasma Sprayed 8YSZ Thermal Barrier Coatings
Nikhil Kadama, Ganesh Karthikeyan, Dhananjay Kulkarni, Prajakta Jagtap
Tribology in Industry, Vol. 44, No. 2, pp. 230-243, 2022
DOI: 10.24874/ti.1105.05.21.07

Friction Coefficient of Rubber Shoe Sole Sliding Against Different Rubber Floor Tiles
Mohamed Ahmed Ramadan
Tribology in Industry, Vol. 44, No. 2, pp. 244-252, 2022
DOI: 10.24874/ti.1188.09.21.11

Optimization of Abrasive Wear Parameters of Halloysite Nanotubes Reinforced Silk/Basalt Hybrid Epoxy Composites using Taguchi Approach
S.M. Darshan, Bheemappa Suresha, Imran M. Jamadar
Tribology in Industry, Vol. 44, No. 2, pp. 253-267, 2022
DOI: 10.24874/ti.1131.06.21.08

Analysis of Oil Distribution and Reduction of Axial Force due to Oil Supply in a Multi-Plate Clutch
Daniel Groetsch, Rudi Motzet, Katharina Voelkel,
Hermann Pflaum, Karsten Stahl
Tribology in Industry, Vol. 44, No. 2, pp. 268-282, 2022
DOI: 10.24874/ti.1168.08.21.11

Experimental and Statistical Study of Surface Roughness in CNC Slot Milling of AL 7075 Alloy Using Full and Fractional Factorial Design
Nikolaos Fountas, Kyriaki -E. Aslani, John Kechagias,
Panagiotis Kyratsis, Nikolaos Vaxevanidis
Tribology in Industry, Vol. 44, No. 2, pp. 283-293, 2022
DOI: 10.24874/ti.1151.07.21.11

Investigation on the Mechanical and Wear Behaviour of Al-6082-BN-B4C-Corn Cob Ash Hybrid Composites
Manu Sam, N. Radhika, Valluri Sidvilash, T. Mohanraj
Tribology in Industry, Vol. 44, No. 2, pp. 294-309, 2022
DOI: 10.24874/ti.1165.08.21.11

Influence of Heat Treatment of 30MnB5 Steel on its Micromechanical Properties and Resistance to
Abrasion Wear

Myroslav Khoma, Vasyl Vynar, Chrystyna Vasyliv, Vadym Zakiev, Bohdan Datsko, Myron Golovchuk
Tribology in Industry, Vol. 44, No. 2, pp. 310-321, 2022
DOI: 10.24874/ti.1146.06.21.02

Computer Simulation and Optimization of Elliptic Bore Journal Bearing
Sushanta Kumar Pradhan, Ramanuj Kumar,
Prakash Chandra Mishra
Tribology in Industry, Vol. 44, No. 2, pp. 322-333, 2022
DOI: 10.24874/ti.1179.09.21.01

A Study on the Relationship Between Contact Pressures in a Grade2 TDN–UHMWPE Hip Implant: Young’s Modulus and Poisson’s Ratio
Myron Chernets, Yuriy Chernets, Jaroslaw Zubrzycki
Tribology in Industry, Vol. 44, No. 2, pp. 334-342, 2022
DOI: 10.24874/ti.1233.12.21.03

Influence of the Structural State of the Mg-1%Ca Magnesium Alloy on Tribological Properties
Vladimir Semenov, Leva Shuster, Hsin-Chih Lin,
Sergey Chertovskikh, Olga Kulyasova
Tribology in Industry, Vol. 44, No. 2, pp. 343-351, 2022
DOI: 10.24874/ti.1162.08.21.02

A Method to Evaluate Wear and Vibration Characteristics of CNC Lathe Spindle
Van Hung Pham, Minh Tam Pham, Thuy Duong Nguyen
Tribology in Industry, Vol. 44, No. 2, pp. 352-359, 2022
DOI: 10.24874/ti.1206.10.21.04


Last Edition


tribology

Volume 44
Number 3
September 2022


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents