headerphoto

Volume 41, No 4, 2019, Pages 604-612


Download full text in PDF

Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique

Authors:

C. Aravind , S. Gopalakrishnan , N. Radhika

DOI: 10.24874/ti.2019.41.04.12

Received: 29 April 2019
Revised: 27 June 2019
Accepted: 11 August 2019
Published: 15 December 2019

Abstract:

Fabrication of Aluminum LM13/MoS2/TiO2 hybrid metal matrix composite via stir casting technique was carried out to analyze the wear characteristics at an elevated temperature of 150 C using pin on disc tribometer. The parameters namely load, sliding velocity and sliding distance were varied for five levels as per the run order generated from Response Surface Methodology. From experiments, it was observed that the wear rate decreased with reduced sliding velocity initially due to mechanically mixed layer formation and then increasess. Also the results showed a reduction in wear rate with low loading and sliding distance conditions. Minimum wear rate was observed at a load of (11N), sliding velocity (1m/s) and sliding distance (848m) which was the ideal condition. Results concluded that the load applied was the significant factor over rate of wear leading to the occurrence of deep grooves along with delamination at higher loads. At minimal loads, appearance of shallow grooves in the sliding direction was observed.Major Applications of AMMC include the manufacturing of piston liners in automobiles and bearings, gears for aircraft engines which are often subjected to high friction and temperatures.

Keywords:

Adhesive wear, Hybrid metal matrix composite, Elevated temperature, Scanning electron microscope, Response surface methodology



Last Edition


tribology

Volume 41
Number 4
December 2019


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents


News