Volume 43, No 2, 2021
Contents:
Influence of Welding Position on Tribological Behavior of SS-309L Cladded Surface on 9Cr-1Mo Steel
V.D. Kalyankar, H.V. Naik
Tribology in Industry, Vol. 43, No. 2, pp. 177-188, 2021
DOI: 10.24874/ti.906.06.20.11
Effect of Substrate Surface Roughness on the Tribological Properties of DLC-H Coatings on Tappet Valve
F.O. Kolawole, S.K. Kolawole, L.B. Varela, A. Kraszczuk,
M.A. Ramirez, A.P. Tschiptschin
Tribology in Industry, Vol. 43, No. 2, pp. 189-199, 2021
DOI: 10.24874/ti.927.07.20.11
Sliding and Corrosion Wear of Magnetron Sputtered TiO2 Films Deposited with Different Argon and Oxygen Mixtures
W. Aperador, J. Bautista-Ruiz, J.C. Caicedo
Tribology in Industry, Vol. 43, No. 2, pp. 200-210, 2021
DOI: 10.24874/ti.925.08.20.12
Surface Saturation with Carbon Using Plasma Arc and Graphite Coating
V.H. Vu, A.E. Balanovskiy, V.T. Doan, V.T. Nguyen
Tribology in Industry, Vol. 43, No. 2, pp. 211-221, 2021
DOI: 10.24874/ti.951.08.20.12
Study of Lubricating Oil Degradation of CI Engine Fueled with Diesel-Ethanol Blend
S.K. Kurre, S. Pandey, N. Khatri, S.S. Bhurat, S.K. Kumawat,
S. Saxena, S. Kumar
Tribology in Industry, Vol. 43, No. 2, pp. 222-231, 2021
DOI: 10.24874/ti.913.06.20.11
Comparison of the Tribological Properties of Environmentally Friendly Esters Produced by
Different Mechanisms
R. Kreivaitis, M. Gumbyte, V. Makareviciene
Tribology in Industry, Vol. 43, No. 2, pp. 232-240, 2021
DOI: 10.24874/ti.1023.12.20.02
The Mathematical Model of Motion Trajectory of Wear Particle Between Textured Surfaces
V. Marchuk, M. Kindrachuk, Ya. Krysak, O. Tisov, O. Dukhota,
Y. Gradiskiy
Tribology in Industry, Vol. 43, No. 2, pp. 241-246, 2021
DOI: 10.24874/ti.1001.11.20.03
Sliding Wear Investigation of Ni-based Coating for High-Temperature Application
S.W. Rukhande, W.S. Rathod, D. Bhosale
Tribology in Industry, Vol. 43, No. 2, pp. 247-258, 2021
DOI: 10.24874/ti.945.08.20.11
Comparative Study of Tribological and Mechanical Properties Between Single Layers of Al2O3 and Si3N4 Deposited on AISI 316 Stainless Steel
E. Hernandez-Rengifo, C.H. Ortiz, C.H. Hidalgo, J.A. Ballesteros, J.C. Caicedo
Tribology in Industry, Vol. 43, No. 2, pp. 259-273, 2021
DOI: 10.24874/ti.956.09.20.01
Experimental Investigation of the Effects of Process Parameters on Cutting Force in External Cylindrical Grinding
T.-L. Nguyen, V.T. Thai, L. Hoang
Tribology in Industry, Vol. 43, No. 2, pp. 274-282, 2021
DOI: 10.24874/ti.1013.11.20.01
Analysis of the Energy Balance of Friction on the Rolling Contact
S.V. Fedorov
Tribology in Industry, Vol. 43, No. 2, pp. 283-297, 2021
DOI: 10.24874/ti.1042.01.21.03
Dynamic Mechanical Analysis and Optimization of Hybrid Carbon-Epoxy Composites Wear using Taguchi Method
G.S. Divya, B. Suresha, H.M. Somashekar, I.M. Jamadar
Tribology in Industry, Vol. 43, No. 2, pp. 298-309, 2021
DOI: 10.24874/ti.931.07.20.11
Friction Modifiers Optimization on Tribological Properties of Non-asbestos Organic (NAO) Brake Pad by DoE-Taguchi Method
Jamasri , H.S.B Rochardjo, P. Nawangsari, A.T. Waskito
Tribology in Industry, Vol. 43, No. 2, pp. 310-320, 2021
DOI: 10.24874/ti.1044.01.21.04
The Effect of the Use of Cutting Zone Minimum Quantity Lubrication and Wiper Geometry Inserts on Titanium Ti6Al4V Surface Quality After Turning
P. Karolczak, M. Kowalski, K. Raszka
Tribology in Industry, Vol. 43, No. 2, pp. 321-333, 2021
DOI: 10.24874/ti.1077.03.21.05
Tribological Analysis on Basalt/Aramid Hybrid Fiber Reinforced Polyimide Composites: An Alternate Brake Pad Material
A.A. Jeya Kumar, N.P. Akshy Ramaseshan, T. Lakshmanan
Tribology in Industry, Vol. 43, No. 2, pp. 334-347, 2021
DOI: 10.24874/ti.912.06.20.12
