headerphoto

Volume 44, No 3, 2022


Contents:

Wheel Squeal Noise in Rail Transport: The Effect of Friction Modifier Composition
Václav Navrátil, Radovan Galas, Milan Klapka, Daniel Kvarda, Milan Omasta, Lubing Shi, Haohao Ding, Wen-Jian Wang,
Ivan Krupka, Martin Hartl
Tribology in Industry, Vol. 44, No. 3, pp. 361-373, 2022
DOI: 10.24874/ti.1211.11.21.02

Dry Sliding Friction and Wear Behavior of LM13/Zircon/Carbon (HMMC’s): An Experimental, Statistical and Artificial Neural Network Approach
Yellampalli Prakash Ravitej, Chikkamaranahalli Boganarasimhaiah Mohan, Maravanji Gangadharaiah Ananthaprasad
Tribology in Industry, Vol. 44, No. 3, pp. 374-393, 2022
DOI: 10.24874/ti.1223.11.21.03

Load Capacity Comparison of Different Wet Multi-Plate Clutches with Sinter Friction Lining with Regard to Spontaneous Damage Behavior
Thomas Schneider, Alexandre Beiderwellen Bedrikow,
Katharina Völkel, Hermann Pflaum, Karsten Stahl
Tribology in Industry, Vol. 44, No. 3, pp. 394-406, 2022
DOI: 10.24874/ti.1256.02.22.04

Wear Influence on Performance of Conical Hydrodynamic Journal Bearing
Dinesh H. Kamble, Vikas M. Phalle, Shankar S. Mantha
Tribology in Industry, Vol. 44, No. 3, pp. 407-423, 2022
DOI: 10.24874/ti.1243.01.22.04

Self and Complementary Mating Of Carbon-Carbon and Carbon-Carbon-Silicon Carbide Composites in Reciprocating Tribo-Interactions
Parshant Kumar, Vijay Kumar Srivastava, Deepak Kumar,
Sanjay Mohan Sharma
Tribology in Industry, Vol. 44, No. 3, pp. 424-433, 2022
DOI: 10.24874/ti.1263.02.22.04

TIG Welding Methods of Repairing Steel Components with Stainless Steel Coatings
Magdaline N. Muigai, Fredrick M. Mwema, Esther T. Akinlabi,
Tien-Chien Jen, Olawale S. Fatoba, Tshenolo P. Leso,
Japheth O. Obiko, Percy Mphasha
Tribology in Industry, Vol. 44, No. 3, pp. 434-448, 2022
DOI: 10.24874/ti.1177.08.21.04

A Fundamental Investigation of the Tribological Performance of Mahua-Castor Blend in a Four-Ball Tester
Bheemappa Suresha, Anantha Padmanabha, Amith Ramesh, Ishwara Prasanna Shirankallu, Shiva Charan Mysore Ramalingappa
Tribology in Industry, Vol. 44, No. 3, pp. 449-460, 2022
DOI: 10.24874/ti.1244.01.22.05

Abrasive Wear Behavior of Centrifugally Cast Al Alloy Composites with TiB2 Reinforcement
Hasan Kılıç, Ömer Savaş
Tribology in Industry, Vol. 44, No. 3, pp. 461-469, 2022
DOI: 10.24874/ti.1282.04.22.06

Methodical Approach to Using Acoustic Emission Method for Tribosystem Monitoring
Victor Vojtov, Katherine Fenenko, Anton Voitov, Andriy Hrynkiv, Oleg Lyashuk, Yuriy Vovk
Tribology in Industry, Vol. 44, No. 3, pp. 470-481, 2022
DOI: 10.24874/ti.1298.05.22.08

Design of Hydrodynamically Lubricated a New Micro-pocketed Tilting Pad Thrust Bearing Based on Simulated Performance Parameters
J.C. Atwal, R.K. Pandey
Tribology in Industry, Vol. 44, No. 3, pp. 482-497, 2022
DOI: 10.24874/ti.1286.04.22.07

Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters Under MQL Condition
Branislav Sredanovic, Djordje Cica, Stevo Borojevic, Sasa Tesic, Davorin Kramar
Tribology in Industry, Vol. 44, No. 3, pp. 498-507, 2022
DOI: 10.24874/ti.1301.05.22.07

Experimental Investigations on Temperature and Frictional Behaviors of Textured Journal Bearings
Saurabh Kango, Nitin Sharma, Rajesh K. Sharma, R.K. Pandey
Tribology in Industry, Vol. 44, No. 3, pp. 508-517, 2022
DOI: 10.24874/ti.1278.03.22.07

Characteristics and Abrasive Wear Resistance of Plasma Alloyed Layers Based on Tin Bronze and Chromium Carbide
Andrey Evgenievich Balanovskiy, Nguyen Van Trieu, Nguyen Van Vinh, Astafieva Natalia Anatolievna
Tribology in Industry, Vol. 44, No. 3, pp. 518-527, 2022
DOI: 10.24874/ti.1274.03.22.06

Investigations on Contact Pressures and Durability of Metal-Polymer Dry Sliding Bearings with Miniature, Small and Large Diameters
Myron Chernets, Anatolii Kornienko, Yuriy Chernets
Tribology in Industry, Vol. 44, No. 3, pp. 528-539, 2022
DOI: 10.24874/ti.1313.05.22.09

Modeling and Prediction of Surface Roughness in the End Milling Process using Multiple Regression Analysis and Artificial Neural Network
Strahinja Đurovic, Jelena Stanojkovic, Dragan Lazarevic,
Bogdan Cirkovic, Aleksa Lazarvic, Dragan Džunic,
Živce Šarkocevic
Tribology in Industry, Vol. 44, No. 3, pp. 540-549, 2022
DOI: 10.24874/ti.1368.07.22.09


Latest issue


tribology

Volume 46
Number 1
March 2024


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents