Volume 45, No 1, 2023
Contents:
Vegetable Oil-Based Pentaerythritol Ester for Industrial Air Compressor Applications: A Tribological Investigation
P. Chengareddy, S. Arumugam
Tribology in Industry, Vol. 45, No. 1, pp. 1-11, 2023
DOI: 10.24874/ti.1376.09.22.12
A Review on Modeling and Stability Aspects of Gas Foil Bearing Supported Rotors
Debanshu S. Khamari, Jitesh Kumar, Suraj K. Behera
Tribology in Industry, Vol. 45, No. 1, pp. 12-33, 2023
DOI: 10.24874/ti.1381.09.22.01
Estimation and Optimization of Worm Drive Efficiency using Taguchi and Symmetric Quasi-D Optimal Methods
Huu Loc Nguyen, Khoa Nam Nguyen, Minh Man Le
Tribology in Industry, Vol. 45, No. 1, pp. 34-50, 2023
DOI: 10.24874/ti.1396.10.22.01
An Overview of the Mechanical and Tribological Characteristics of Non - Ferrous Metal Matrix Composites for Advanced Engineering Applications
Amandeep Singh Wadhwa, Amit Chauhan
Tribology in Industry, Vol. 45, No. 1, pp. 51-80, 2023
DOI: 10.24874/ti.1359.08.22.12
Parametric Studies on Performance of Oil-Free Thrust Foil Bearings at Lower Speeds
S. Supreeth, T.N. Raju, R.N. Ravikumar, C.R. Mahesha
Tribology in Industry, Vol. 45, No. 1, pp. 81-88, 2023
DOI: 10.24874/ti.1407.11.22.12
Minimizing Tool Wear, Cutting Temperature and Surface Roughness in the Intermittent Turning of AISI D3 Steel Using the DF and GRA Method
Fethi Khelfaoui, Mohammed Athmane Yallese, Septi Boucherit, Hanane Boumaaza, Nourdine Ouelaa
Tribology in Industry, Vol. 45, No. 1, pp. 89-101, 2023
DOI: 10.24874/ti.1395.10.22.01
Predictive Assessment of Maximum Contact Pressures in Metal-on-Polymer Hip Joint Implants by Analytical Method and FEM
Myron Chernets, Yuriy Chernets
Tribology in Industry, Vol. 45, No. 1, pp. 102-110, 2023
DOI: 10.24874/ti.1427.12.22.02
Effect of Filler Materials on Abrasive Wear Performance of Glass/Epoxy Composites
Bheemappa Suresha, Shivaprakash Vidyashree,
Harshavardhan Bettegowda
Tribology in Industry, Vol. 45, No. 1, pp. 111-120, 2023
DOI: 10.24874/ti.1386.10.22.01
Effect of Saturated Fatty Acids on the Antiwear and Rheological Properties of Olive Oil
M.S. Charoo, Fozia Akhter, Muhammad Hanief, Wani Khalid Shafi, Mehak Nissar
Tribology in Industry, Vol. 45, No. 1, pp. 121-128, 2023
DOI: 10.24874/ti.1404.11.22.02
Study on Changes in Hardness and Wear Resistance of 3D Printed Ti6Al4V with Heat Treatment Temperature
Nay Win Khun, Wei Quan Toh, Erjia Liu
Tribology in Industry, Vol. 45, No. 1, pp. 129-135, 2023
DOI: 10.24874/ti.1421.12.22.02
Improving the Resistance to Wear and Mechanical Characteristics of Cladding Layers on Titanium and its Alloys: A Review
Rajeev Ranjan, Anil Kumar Das
Tribology in Industry, Vol. 45, No. 1, pp. 136-152, 2023
DOI: 10.24874/ti.1416.12.22.03
Estimation of the Cartilage Volume Loss Due to Knee Osteoarthritis - Case Study
Suzana Petrovic Savic, Nikola Prodanovic, Vladimir Kocovic, Tijana Prodanovic, Dragan Dzunic, Branko Ristic, Goran Devedzic
Tribology in Industry, Vol. 45, No. 1, pp. 153-160, 2023
DOI: 10.24874/ti.1454.12.22.03
Tribological Properties of 3D Printed Polymers: PCL, ABS, PLA and Co Polyester
Mohamed Ahmed Ramadan, Hassan. A. Sabour,
Eman EL-Shenawy
Tribology in Industry, Vol. 45, No. 1, pp. 161-167, 2023
DOI: 10.24874/ti.1410.11.22.02
Refining Used Lubricant Oils with Different Concentration Levels of Sulfuric Acid and Nonylphenol
José Abisenas Alvarez-Rivera, Guillermo Castańón-Nájera,
Juan Manuel Urrieta-Saltijeral, José Ramón Laínes-Canepa,
José Roberto Hernández-Barajas, Liliana Pampillón-González, Carlos Mario Morales-Bautista
Tribology in Industry, Vol. 45, No. 1, pp. 168-177, 2023
DOI: 10.24874/ti.1411.11.22.03
Lubrication of Radial Loaded Tapered Roller Bearings Under High Rotational Speeds
Marcus Gärtner, Christian Brecher, Stephan Neus,
Cornelia Recker, Mark Franken, Thomas Engelmann, Ingo Wagler
Tribology in Industry, Vol. 45, No. 1, pp. 178-190, 2023
DOI: 10.24874/ti.1394.10.22.02
