headerphoto

Volume 40, No 1, 2018


Contents:

The Accelerated Aging Effect of Salt Water on Lignocellulosic Fibre Reinforced Composites
C. Fragassa, A. Pavlovic, I. Živkovic
Tribology in Industry, Vol. 40, No. 1, pp. 1-9, 2018
DOI: 10.24874/ti.2018.40.01.01

Emission and Friction Analysis of IC Engine Running in Methanol Blend
A. Gupta, P.C. Mishra
Tribology in Industry, Vol. 40, No. 1, pp. 10-18, 2018
DOI: 10.24874/ti.2018.40.01.02

A Historical Review on the Tribological Performance of Refrigerants used in Compressors
M.U. Bhutta, Z.A. Khan, N. Garland, A. Ghafoor
Tribology in Industry, Vol. 40, No. 1, pp. 19-51, 2018
DOI: 10.24874/ti.2018.40.01.03

Experimental Investigation on Tool Wear Behavior and Cutting Temperature during Dry Machining of Carbon Steel SAE 1030 Using KC810 and KC910 Coated Inserts
Y. Tamerabet, M. Brioua, M. Tamerabet, S. Khoualdi
Tribology in Industry, Vol. 40, No. 1, pp. 52-65, 2018
DOI: 10.24874/ti.2018.40.01.04

Evaluating Lubrication Capability of Soybean Oil with Nano Carbon Additive
G.C. Cristea, C. Dima, C. Georgescu, D. Dima, L. Deleanu,
L.C. Solea
Tribology in Industry, Vol. 40, No. 1, pp. 66-72, 2018
DOI: 10.24874/ti.2018.40.01.05

Introduction of Nickel Coated Silicon Carbide Particles in Aluminum Metal Matrix Hardfaced by MIG/TIG Processes on Precoated Flux Layer
V. Kamburov, R. Dimitrova, M. Kandeva
Tribology in Industry, Vol. 40, No. 1, pp. 73-80, 2018
DOI: 10.24874/ti.2018.40.01.06

Analysis of Three Body Abrasive Wear Behaviour of Centrifugally Cast Aluminium Composite Reinforced with Ni Coated SiC using Taguchi Technique
N. Radhika
Tribology in Industry, Vol. 40, No. 1, pp. 81-91, 2018
DOI: 10.24874/ti.2018.40.01.07

The Temperature Distribution in Friction Clutch Disc under Successive Engagements
M.H. Faidh-Allah
Tribology in Industry, Vol. 40, No. 1, pp. 92-99, 2018
DOI: 10.24874/ti.2018.40.01.08

Influence of Workpiece Hardness on Tool Wear in Profile Micro-milling of Hardened Tool Steel
B. Sredanović, G. Globocki-Lakić, D. Kramar, F. Pušavec
Tribology in Industry, Vol. 40, No. 1, pp. 100-107, 2018
DOI: 10.24874/ti.2018.40.01.09

Mathematical Modelling and Optimization of the Compressive Strength, Hardness and Density of a Periwinkle-Palm Kernel and Phenolic Resin Composite Brake Pad
B. Dan-asabe, A. Stephen
Tribology in Industry, Vol. 40, No. 1, pp. 108-116, 2018
DOI: 10.24874/ti.2018.40.01.10

Thermal and Dry Sliding Wear Behavior of Plasma Sprayed Red Mud-Fly Ash Coatings on Mild Steel
H. Sutar, D. Roy, S.C. Mishra, S. Patra, R. Murmu
Tribology in Industry, Vol. 40, No. 1, pp. 117-128, 2018
DOI: 10.24874/ti.2018.40.01.11

Eco-friendly Multifunction Petroleum Additives: Preparation, Characterization and Evaluation
H.F. Abo-Hatab, N.G. Kandile, H.M. Salah
Tribology in Industry, Vol. 40, No. 1, pp. 129-138, 2018
DOI: 10.24874/ti.2018.40.01.12

Dynamics and Lubrication Problem Analysis of Main Bearings for IC Engines Based on Coupling between a Crankshaft and a Flexible Whole Engine Block
Y. Rozhdestvensky, N. Khozeniuk, S. Surovtsev
Tribology in Industry, Vol. 40, No. 1, pp. 139-148, 2018
DOI: 10.24874/ti.2018.40.01.13

Experimental Hydraulic Device for the Testing of Hydraulic Pumps and Liquids
Z. Tkáč, J. Kosiba, Ľ. Hujo, J. Jablonický, J. Nosian
Tribology in Industry, Vol. 40, No. 1, pp. 149-155, 2018
DOI: 10.24874/ti.2018.40.01.14

An Experimental Investigation of Cu-Ni-Sn Alloy on Microstructure, Hardness and Wear Parameters Optimization using DOE
S. Ilangovan, J. Sreejith, M. Manideep, S. Harish
Tribology in Industry, Vol. 40, No. 1, pp. 156-163, 2018
DOI: 10.24874/ti.2018.40.01.15


Current Issue


tribology

Volume 46
Number 3
September 2024


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents