Volume 45, No 3, 2023
Contents:
Influence of Nano-Lubrication On Tribological Behavior of AZ91 Magnesium Alloy Under Fretting Condition
Bharat Kumar, Shahid Saleem, M.F. Wani, Rakesh Sehgal,
Sanjay Kumar
Tribology in Industry, Vol. 45, No. 3, pp. 375-386, 2023
DOI: 10.24874/ti.1426.12.22.06
Structure and Properties of Boride Coatings Obtained by the Plasma-Arc Method
Nguyen Van Vinh, Nguyen Van Trieu,
Andrey Evgenievich Balanovskiy, Astafieva Natalia Anatolievna
Tribology in Industry, Vol. 45, No. 3, pp. 387-395, 2023
DOI: 10.24874/ti.1458.03.23.05
Investigation on the Effect of Contact Area and Stress Concentration on Slurry Erosion Wear of AA6063 using Hertz contact theory and Numerical Technique
Bhushan D. Nandre, Girish R. Desale
Tribology in Industry, Vol. 45, No. 3, pp. 396-407, 2023
DOI: 10.24874/ti.1433.01.23.05
Ratio of Wheel/Rail Steel Hardness that Ensures
Minimum Wear
Azamat Kanayev, Amangeldy Kanayev, Aliya Moldakhmetova
Tribology in Industry, Vol. 45, No. 3, pp. 408-415, 2023
DOI: 10.24874/ti.1459.03.23.06
Frictional Characteristics of Progressively Worn Footwear Outsoles on Slippery Surfaces
Shubham Gupta, Subhodip Chatterjee, Arnab Chanda
Tribology in Industry, Vol. 45, No. 3, pp. 416-430, 2023
DOI: 10.24874/ti.1434.01.23.05
Assessing the Sensitivity of the Rundown of a Turbocharger Rotor Shaft to Determine Its Technical Condition
Alexandr Gritsenko, Vladimir Shepelev, Alexandr Burtsev,
Adil Shaikemelov
Tribology in Industry, Vol. 45, No. 3, pp. 431-443, 2023
DOI: 10.24874/ti.1473.04.23.06
Insight on the Effect of Nanoparticles addition in Oil Lubrication: A Review
Amrut S. Aher, Vijay Kumar Pandey
Tribology in Industry, Vol. 45, No. 3, pp. 444-456, 2023
DOI: 10.24874/ti.1437.01.23.05
Effect of Nano-Additives on Tribological Behaviour of Hazelnut Oil and Sunflower Oil
Niveditha Noble, U.V. Akhil, S. Aravind Krishna, N. Radhika,
M. Ramu
Tribology in Industry, Vol. 45, No. 3, pp. 457-471, 2023
DOI: 10.24874/ti.1464.03.23.05
Effects of Shot Peening Pressure on Friction and Wear of High Pressure Cold Sprayed Ti-6Al-4V Coatings Under Dry and Lubrication Conditions
Nay Win Khun, Pham Quang Trung, Adrian Wei YeeTan, Wen Sun, Erjia Liu, David Lee Butler
Tribology in Industry, Vol. 45, No. 3, pp. 472-486, 2023
DOI: 10.24874/ti.1466.03.23.05
Prediction of Gearbox Oil Degradation Based on Online Sensor Data and Machine Learning Algorithms
Kunal Kumar Gupta, S.M. Muzakkir
Tribology in Industry, Vol. 45, No. 3, pp. 487-502, 2023
DOI: 10.24874/ti.1491.06.23.08
Wear Metal Concentrations Used for Enhancing Spectrometric Oil Analysis Method Credibility and Statistical Feedback - A Step Towards Big Data Analysis
Polychronis S. Dellis
Tribology in Industry, Vol. 45, No. 3, pp. 503-510, 2023
DOI: 10.24874/ti.1501.06.23.08
Wear Behavior of PEEK-Based Composites
Designed for Water Lubrication Bearings
Vladislav O. Alexenko, Dmitry G. Buslovich, Sergey V. Panin
Tribology in Industry, Vol. 45, No. 3, pp. 511-521, 2023
DOI: 10.24874/ti.1516.06.23.08
Role of Particle Shape on Slurry Erosion Wear of AA6063
Bhushan D. Nandre, Girish R. Desale
Tribology in Industry, Vol. 45, No. 3, pp. 522-531, 2023
DOI: 10.24874/ti.1503.06.23.08
Abrasive Wear Performance of Coir Fiber Reinforced Polymer Composite
A. Shalwan, S. Mallampati, B.F. Yousif
Tribology in Industry, Vol. 45, No. 3, pp. 532-541, 2023
DOI: 10.24874/ti.1500.06.23.07
Numerical and Experimental Studies on Performance Enhancement of Thrust Pad Bearing Employing Surface Texture: A Review
Dhanishta Sirohi, Shipra Aggarwal
Tribology in Industry, Vol. 45, No. 3, pp. 542-560, 2023
DOI: 10.24874/ti.1463.03.23.06
