Volume 46, No 4, 2024
Contents:
A Study on Material Removal Rate in Powder-Mixed Electro-Discharge Machining Utilizing Integrated Experimental and Computational Fluid Dynamics Analysis
Nguyen Huu-Phan, V.S. Ganachari, Shailesh Shirguppikar,
P.B. Gavali, S.S. Deshmukh,
P.S. Jadhav, L. Selvarajan,
Nguyen Duc-Toan, M.V. Pachore
Tribology in Industry, Vol. 46, No. 4, pp. 549-559, 2024
DOI: 10.24874/ti.1660.04.24.05
Effect of Electrode Material Variations on Wear Characteristics of Stir Cast A356/Red Mud/TiC Hybrid Metal Matrix Composite During Electrical Discharge Machining
Debasmita Pani, B. Surekha, Rishitosh Ranjan,
Priyaranjan Samal, S. Rama Rao, Prakash Chandra Mishra
Tribology in Industry, Vol. 46, No. 4, pp. 560-569, 2024
DOI: 10.24874/ti.1642.03.24.05
Friction and Wear of DLC Coating Deposited on M2 Steel via µW-PECVD Against 100Cr6 Steel with Different Normal Loads and Sliding Speeds Under Dry and Lubrication Conditions
Nay Win Khun, Anne Neville, Ivan Kolev, Hongyuan Zhao
Tribology in Industry, Vol. 46, No. 4, pp. 570-588, 2024
DOI: 10.24874/ti.1670.04.24.07
Optimization in Finite Elements to Define the Friction Factor Through Ring Compression Tests
Thomas G. Santos, André Rosiak, Diego R. Alba,
Diego P. Wermuth, Lirio Schaeffer
Tribology in Industry, Vol. 46, No. 4, pp. 589-595, 2024
DOI: 10.24874/ti.1694.05.24.07
Fabrication and Characterization of Physical, Mechanical, and Wear Characteristics of AA7075/SiC Composites by Floating Die
Ameen Al Njjar, Kamar Mazloum, Amit Sata
Tribology in Industry, Vol. 46, No. 4, pp. 596-610, 2024
DOI: 10.24874/ti.1672.04.24.07
Friction and Wear Properties of Phosphonium Based Ionic Liquid Used as Additive in Synthetic and Bio Based Lubricants
Nouman Haider, Muhammad Moneeb Butt, Rehan Zahid,
Mian Ashfaq Ali, Jawad Aslam, Riaz Ahmed Mufti,
Muhammad Usman Bhutta
Tribology in Industry, Vol. 46, No. 4, pp. 611-623, 2024
DOI: 10.24874/ti.1648.03.24.08
Engine Health Status Prediction Based on Oil Analysis With Augmented Machine Learning Algorithms
Slawomir Szrama
Tribology in Industry, Vol. 46, No. 4, pp. 624-638, 2024
DOI: 10.24874/ti.1736.08.24.09
Microstructural Evolution and Strain-Hardening Behavior in Hadfield Steel Railway Crossings
Gustavo Tressia, Tiago Tepedino, Mohammad Masoumi,
Juan Ignacio Pereira
Tribology in Industry, Vol. 46, No. 4, pp. 639-650, 2024
DOI: 10.24874/ti.1744.08.24.10
Wear Performance of Wire Arc AM SS 316L Plate For Different Thermal History Regions
Abdulrahman Alrumayh
Tribology in Industry, Vol. 46, No. 4, pp. 651-663, 2024
DOI: 10.24874/ti.1654.03.24.10
Effect of Surface Treated Nanofillers on Abrasive Wear of Carbon Fiber/Polyamide Blend Composites
S. Srinivas, R. Hemanth, B. Harshavardhan,
G.S. Ananthapadmanabha, B. Suresha
Tribology in Industry, Vol. 46, No. 4, pp. 664-676, 2024
DOI: 10.24874/ti.1719.07.24.09
Evaluation of the Tribological and Corrosion Resistance Properties of 24-Bilayer TiN/TiAlN Coatings in Simulated Body Fluid
Willian Arnulfo Aperador Chaparro, Julio Cesar Caicedo Angulo, Jorge Bautista-Ruiz
Tribology in Industry, Vol. 46, No. 4, pp. 677-694, 2024
DOI: 10.24874/ti.1730.08.24.10
Case Study: Correlations Between Curve Squeal, Weather Conditions, and Traction in a Tram Loop
Martin Valena, Milan Omasta, Milan Klapka, Radovan Galas, Vaclav Navratil, Ivan Krupka, Martin Hartl
Tribology in Industry, Vol. 46, No. 4, pp. 695-708, 2024
DOI: 10.24874/ti.1728.07.24.10
Influence of Bias Voltage on the Microstructure, Mechanical and Corrosion Properties of Ti/CrN/TiN Multilayered Films Deposited by Cathodic Arc Evaporation
Vu Van Huy, Nikolay B. Rodionov, Valery A. Karpov,
Ngo Thanh Binh, Nguyen Dang Khoa, Vu Thi Lan Vi
Tribology in Industry, Vol. 46, No. 4, pp. 709-721, 2024
DOI: 10.24874/ti.1760.09.24.11
Studies on Physical, Mechanical & Tribological Properties of Al6063 Incorporated with CNT & Nano Clay as Filler Materials
Asifiqbal M. Doddamani, Iresh G.Bhavi, R. Noorahmed,
Mohan B. Vanarotti, J. Balaji, Syed Sameer Hussain
Tribology in Industry, Vol. 46, No. 4, pp. 722-735, 2024
DOI: 10.24874/ti.1748.09.24.11
Spectroscopic, Diagnostics, and Surface Modification of Stainless Steel Doped with Ti Plasma Produced by DC Magnetron Sputtering and Used in Biomedical Applications
Mustafa A. Mahmood, Riyam Adnan Hammudi
Tribology in Industry, Vol. 46, No. 4, pp. 736-745, 2024
DOI: 10.24874/ti.1787.11.24.11
