Volume 37, No 4, 2015

Contents:

AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic
M. Pantić, S. Mitrović, M. Babić, D. Jevremović, T. Kanjevac,
D. Džunić, D. Adamović
Tribology in Industry, Vol. 37, No. 4, pp. 391-399, 2015

Development of a Constitutive Friction Law based on the Frictional Interaction of Rough Surfaces
F. Beyer, F. Hauer, K. Willner
Tribology in Industry, Vol. 37, No. 4, pp. 400-412, 2015

Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles
D. Džunić, S. Mitrović, M. Babić, I. Bobić, M. Pantić, D. Adamović, B. Nedeljković
Tribology in Industry, Vol. 37, No. 4, pp. 413-420, 2015

Static Friction Coefficient into Cylindrical Joints Assemblies
A. Todi-Eftimie, S. Bobancu, C. Gavrila, L. Eftimie
Tribology in Industry, Vol. 37, No. 4, pp. 421-426, 2015

Experimental Determination of Contact Area
O. Maršálek, J. Dlugoš, P. Raffai, P. Novotný, J. Knotek
Tribology in Industry, Vol. 37, No. 4, pp. 427-433, 2015

Applications of Friction Stir Processing during Engraving of Soft Materials
V. Kočović, S. Mitrović, G. Mihajlović, M. Mijatović, B. Bogdanović, Đ. Vukelić, B. Tadić
Tribology in Industry, Vol. 37, No. 4, pp. 434-439, 2015

Friction and Material Modelling in Finite Element Simulation of Orthogonal Cutting
A.P. Markopoulos, N.M. Vaxevanidis, D.E. Manolakos
Tribology in Industry, Vol. 37, No. 4, pp. 440-448, 2015

Experimental Analysis on Tribological Behavior of Nano Based Bio-Lubricants using Four Ball Tribometer
S. Baskar, G. Sriram, S. Arumugam
Tribology in Industry, Vol. 37, No. 4, pp. 449-454, 2015

A Study the Axial and Radial Rotor Stability of the Turbo Machinery with Allowance the Geometry of the Surface and Properties of the Lubricating Fluid
E.A. Zadorozhnaya, S.V. Cherneyko, M.I. Kurochkin,
N.A. Lukovich
Tribology in Industry, Vol. 37, No. 4, pp. 455-463, 2015

Establishing a Methodology for Experimental Measuring of Loads and Stress State Determination on Clamp Dogs of Carrying Structures
E. Hristovska
Tribology in Industry, Vol. 37, No. 4, pp. 464-472, 2015

Investigation of Friction Behaviors of Brake Shoe Materials using Metallic Filler
E. Surojo, Jamasri, V. Malau, M.N. Ilman
Tribology in Industry, Vol. 37, No. 4, pp. 473-481, 2015

Experimental Evaluation of the Surface Alteration of Gasket Samples under Operative Conditions
M.C. Bignozzi, A. Saccani, C. Fragassa
Tribology in Industry, Vol. 37, No. 4, pp. 482-490, 2015

Airworthiness Certification of Fe-Si3N4-graphite Brake Composites for Military Aircraft
T.R. Prabhu
Tribology in Industry, Vol. 37, No. 4, pp. 491-499, 2015

Epoxy Resin Based Composites, Mechanical and Tribological Properties: A Review
S.A. Bello, J.O. Agunsoye, S.B. Hassan, M.G. Zebase Kana,
I.A. Raheem
Tribology in Industry, Vol. 37, No. 4, pp. 500-524, 2015

An Attempt to Calibrate the Laser Induced Fluorescence (LIF) Signal used for Oil Film Thickness (OFT) Measurements in Simulating Test Rigs
P.S. Dellis
Tribology in Industry, Vol. 37, No. 4, pp. 525-538, 2015