headerphoto

Volume 42, No 4, 2020


Contents:

Friction and Wear Properties of Rapid Solidified H-Al-17Si Alloys Processed by UV Assisted Stir - Squeeze Casting with DLC-Star (CrN + a-c:H) Coating Under HFRR
N.D. Malleswararao.K, I.N. Niranjan Kumar, Bh. Nagesh
Tribology in Industry, Vol. 42, No. 4, pp. 529-546, 2020
DOI: 10.24874/ti.870.04.20.09

Effect of the Normal Load on the Friction and Wear Behaviour of Nickel-based Alloys Ni-Cr-B-Si-C-W
C. Benouali, M.N. Bachir bey, T. Sayah
Tribology in Industry, Vol. 42, No. 4, pp. 547-555, 2020
DOI: 10.24874/ti.832.01.20.09

Optimization of Test Parameters that Influence on
Dry Sliding Wear Performance of Steel Embedded Glass/Epoxy Hybrid Composites by Using the
Taguchi Approach

G.R. Chavhan, L.N. Wankhade
Tribology in Industry, Vol. 42, No. 4, pp. 556-571, 2020
DOI: 10.24874/ti.863.03.20.09

Methodology of Calculation of Metal-polymer Sliding Bearings for Contact Strength, Durability and Wear
M. Chernets, J. Chernets, M. Kindrachuk, A. Kornienko
Tribology in Industry, Vol. 42, No. 4, pp. 572-581, 2020
DOI: 10.24874/ti.900.06.20.10

Hardness and Wear Behavior of Al 6061/ZrC Composite Processed by Friction Stir Processing
T.S. Kumar, R. Raghu, S. Shalini
Tribology in Industry, Vol. 42, No. 4, pp. 582-591, 2020
DOI: 10.24874/ti.855.02.20.10

Green Tribology
R. Shah, A. Martini, M. Woydt, H. Wong
Tribology in Industry, Vol. 42, No. 4, pp. 592-596, 2020
DOI: 10.24874/ti.987.10.20.11

Surface Roughness Prediction in CNC Hole Turning of 3X13 Steel using Support Vector Machine Algorithm
T. Do Duc, N. Nguyen Ba, C. Nguyen Van, T. Nguyen Nhu,
D. Hoang Tien
Tribology in Industry, Vol. 42, No. 4, pp. 597-607, 2020
DOI: 10.24874/ti.940.08.20.11

Comparative Structural Characterization of Fiber Reinforced Composite Rotating Disc: A Validated Investigation
G.R. Kumar, R. Vijayanandh, M.B. Kamaludeen,
S. Balasubramanian, P. Jagadeeshwaran, M. Ramesh
Tribology in Industry, Vol. 42, No. 4, pp. 608-620, 2020
DOI: 10.24874/ti.899.05.20.10

The Mechanism for Improving Anti-Wear Properties of Oils Using Hydrodynamic Dispersion
Ye. Ventsel, O. Orel, O. Shchukin, N. Saienko, S. Kovalevskyi
Tribology in Industry, Vol. 42, No. 4, pp. 621-626, 2020
DOI: 10.24874/ti.905.06.20.10

Control of the Exhaust Gas Tract Resistance of Modern Engines by the Run-Down Time during Testing
A. Gritsenko, V. Shepelev, K. Lukomsky, F. Grakov,
N. Kostyuchenkov, O. Kostyuchenkova
Tribology in Industry, Vol. 42, No. 4, pp. 627-640, 2020
DOI: 10.24874/ti.966.09.20.11

Multi-Response Optimization of Parameters in Turning of DSS-2205 using Hybrid (Al2O3+CuO) Nano Cutting Fluid with MQL
S.T. Prashantha Kumar, H.P. Thirthaprasada, M. Nagamadhu
Tribology in Industry, Vol. 42, No. 4, pp. 641-657, 2020
DOI: 10.24874/ti.894.05.20.11

Influence of Cutting Parameters on Surface Roughness during Milling AISI 1045 Steel
D.D. Trung
Tribology in Industry, Vol. 42, No. 4, pp. 658-665, 2020
DOI: 10.24874/ti.969.09.20.11

Effect of Cavitation on the Performance of Journal Bearings Lubricated with Non-Newtonian Lubricant
B.A. Abass, M.A. Mahdi
Tribology in Industry, Vol. 42, No. 4, pp. 666-678, 2020
DOI: 10.24874/ti.959.09.20.11

HfN Coating of ASSAB 17 Steel by PVD Method and its Effects on 6063-T5 Aluminum Alloy Turning
J. Ortíz, J. Caicedo, J. Navarro-Devia, J. Martinez, W. Aperador
Tribology in Industry, Vol. 42, No. 4, pp. 679-691, 2020
DOI: 10.24874/ti.924.07.20.11

Evaluation of Tool Wear Characteristics during Machining Ni-Based Super-alloy (Inconel 625) Under Different Lubricating Conditions
P. Singh, C. Padhy
Tribology in Industry, Vol. 42, No. 4, pp. 692-708, 2020
DOI: 10.24874/ti.858.03.20.11


Current Issue


tribology

Volume 46
Number 3
September 2024


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents