Volume 45, No 4, 2023
Contents:
Effect of Build Orientation and Heat Treatment on Erosion Behavior of Al10SiMg Fabricated Using Laser Powder Bed Fusion
Pooja Angolkar, M. Manzoor Hussain
Tribology in Industry, Vol. 45, No. 4, pp. 561-578, 2023
DOI: 10.24874/ti.1470.04.23.06
Experimental Study on Gear EP Lubricant Mixed with Al2O3/SiO2/ZrO2 Composite Additives to Design a Predictive System
Tushar D. Gadekar, Dinesh N. Kamble, Nitin H. Ambhore
Tribology in Industry, Vol. 45, No. 4, pp. 579-590, 2023
DOI: 10.24874/ti.1461.03.23.07
Experimental Investigations on Thermophysical, Tribological and Rheological Properties of MoS2 and WS2 Based Nanolubricants with Castor Oil as Base Lubricant
Jyoti Srivastava, Tandra Nandi, Rakesh Kumar Trivedi
Tribology in Industry, Vol. 45, No. 4, pp. 591-603, 2023
DOI: 10.24874/ti.1472.04.23.07
Effect of Process Parameters on the Solid Particle Erosion Resistance of Transparent Materials
Dogan Acar, Mohammad Hussain Danesh, Ömer Necati Cora
Tribology in Industry, Vol. 45, No. 4, pp. 604-617, 2023
DOI: 10.24874/ti.1495.06.23.08
Analysis and Optimization of Nanolubricated Journal Bearing under Thermoelasto-Hydrodynamic Lubrication Considering Cavitation Effect
Basim A. Abass, Saba Y. Ahmed, Zainab H. Kadhim
Tribology in Industry, Vol. 45, No. 4, pp. 618-633, 2023
DOI: 10.24874/ti.1441.01.23.04
Effect of Internal Structure of Circular Dimples on Hydrodynamic Lubrication Characteristics of Thrust Bearings
Ryota Ishi, Reo Miwa, Norifumi Miyanaga, Jun Tomioka
Tribology in Industry, Vol. 45, No. 4, pp. 634-642, 2023
DOI: 10.24874/ti.1504.06.23.09
Investigation of Wear Resistance of Polyamide PA6 Based Composite Materials for Metal - Polymer Plain Bearings and Gears
Myron Chernets, Yuriy Chernets, Yuriy Skvarok,
Jaroslaw Zubrzycki
Tribology in Industry, Vol. 45, No. 4, pp. 643-649, 2023
DOI: 10.24874/ti.1526.07.23.09
Parametric Design Optimization of Convergent Textured Thrust Bearing in THD Behaviour
Mertad Omar, Youcefi Abdelkader, Maamar Fatouma,
Mostefa Kouider
Tribology in Industry, Vol. 45, No. 4, pp. 650-663, 2023
DOI: 10.24874/ti.1497.06.23.09
Tribology Characteristic of Ball Bearing SKF RB-12.7/G20W using SAE 5W-30 Lubricant with Carbon-Based Nanomaterial Addition
Poppy Puspitasari, Avita Ayu Permanasari,
Muhammad Ilman Hakimi Chua Abdullah, Diki Dwi Pramono, Oscar Jaya Silaban
Tribology in Industry, Vol. 45, No. 4, pp. 664-675, 2023
DOI: 10.24874/ti.1538.09.23.11
A Model for Prediction of Outer Race Defects of Rolling Contact Bearing based on Vibration Data Using Machine Learning Algorithms
Kunal Kumar Gupta, S. M. Muzakkir
Tribology in Industry, Vol. 45, No. 4, pp. 676-685, 2023
DOI: 10.24874/ti.1540.09.23.11
Surface Characteristics, Properties and Wear Resistance OF TIB2 BASED Hard-Alloy Coatings Obtained by Electrospark Deposition at Negative Polarity on
Ti6Al4V Alloy
Todor Penyashki, Georgi Kostadinov, Mara Kandeva,
Antonio Nikolov, Rayna Dimitrova, Valentin Kamburov
Tribology in Industry, Vol. 45, No. 4, pp. 686-698, 2023
DOI: 10.24874/ti.1507.06.23.08
Design, Fabrication, and Application Study of Droplet Tube Based Triboelectric Nanogenerators
Yana Xiao
Tribology in Industry, Vol. 45, No. 4, pp. 699-709, 2023
DOI: 10.24874/ti.1493.06.23.08
Effective Strains Determination in Continuous Constrained Double Bending with Active Friction Forces
Valentin Kamburov, Antonio Nikolov
Tribology in Industry, Vol. 45, No. 4, pp. 710-717, 2023
DOI: 10.24874/ti.1524.07.23.08
Design of the Springs Tightening for a Double Cartridge Mechanical Seal
Andrei Stanciu, Costin Ilinca, Razvan George Ripeanu
Tribology in Industry, Vol. 45, No. 4, pp. 718-728, 2023
DOI: 10.24874/ti.1545.08.23.09
Calculation of Wear of Metallic Surfaces Using Material’s Fatigue Model and 3D Texture Parameters
Guntis Springis, Irina Boiko, Oskars Linins
Tribology in Industry, Vol. 45, No. 4, pp. 729-741, 2023
DOI: 10.24874/ti.1581.11.23.12
