headerphoto

Volume 40, No 3, 2018


Contents:

The Influence of Fibre Orientation on Tribological Performance of Jute Fibre Reinforced Epoxy Composites Considering Different Mat Orientations
F.Z. Alshammari, K.H. Saleh, B.F. Yousif, A. Alajmi, A. Shalwan, J.G. Alotaibi
Tribology in Industry, Vol. 40, No. 3, pp. 335-348, 2018
DOI: 10.24874/ti.2018.40.03.01

Theoretical Investigation of Transient Ultra-Thin Lubricant Film During Rapid Deceleration
M.F. Abd Al-Samieh
Tribology in Industry, Vol. 40, No. 3, pp. 349-357, 2018
DOI: 10.24874/ti.2018.40.03.02

Wear Evaluation on Turning Inserts Superficially Modified with Titanium Nitride by HIPIMS
J.A. Muñoz Diaz, W. Palomino Marmol, I. González Jaimes,
I. Fernández, E.D. V-Niño
Tribology in Industry, Vol. 40, No. 3, pp. 358-369, 2018
DOI: 10.24874/ti.2018.40.03.03

Effect of TiO2 Nanoparticles Blended with Lubricating Oil on the Tribological Performance of the Journal Bearing
S.R. Suryawanshi , J.T. Pattiwar
Tribology in Industry, Vol. 40, No. 3, pp. 370-391, 2018
DOI: 10.24874/ti.2018.40.03.04

Experimental Study of Frictional Vibrations Under Dry Friction Conditions
G.M. Ismailov, A.E. Tyurin
Tribology in Industry, Vol. 40, No. 3, pp. 392-400, 2018
DOI: 10.24874/ti.2018.40.03.05

Investigation of Mixture of Vegetable Oil and Synthetic Esters as Environmentally Friendly Base Stock for Low-temperature Lubrication Applications
R. Kreivaitis, M. Gumbytė
Tribology in Industry, Vol. 40, No. 3, pp. 401-409, 2018
DOI: 10.24874/ti.2018.40.03.06

Simulation of Anti Wear Performance Using a Modified Brugger Test Set Up
J. Sequard-Base, A. Grafl, U. Cihak-Bayr, F. Franek
Tribology in Industry, Vol. 40, No. 3, pp. 410-419, 2018
DOI: 10.24874/ti.2018.40.03.07

Studies on Plasma Sprayed Thermal Barrier Coating with Increase in Coating Thickness
H. Nayak, N. Krishnamurthy, R.A. Shailesh
Tribology in Industry, Vol. 40, No. 3, pp. 420-432, 2018
DOI: 10.24874/ti.2018.40.03.08

Thermal Treatment Effect on Tribological and Corrosion Performances of 13Cr5Ni2Mo Super-Martensitic Stainless Steel
S. Tlili, N.E. Beliardouh, C.E. Ramoul, R. Bahi, O.I. Abdullah,
H. Kaleli, M.A. Samad
Tribology in Industry, Vol. 40, No. 3, pp. 433-439, 2018
DOI: 10.24874/ti.2018.40.03.09

Influence of Ag Nanoparticles for the Anti-wear and Extreme Pressure Properties of the Mineral Oil Based Nano-cutting Fluid
L. Prabu, N. Saravanakumar, G. Rajaram
Tribology in Industry, Vol. 40, No. 3, pp. 440-447, 2018
DOI: 10.24874/ti.2018.40.03.10

Biomimetics Design for Tribological Applications
L. Ivanović, A. Vencl, B. Stojanović, B. Marković
Tribology in Industry, Vol. 40, No. 3, pp. 448-456, 2018
DOI: 10.24874/ti.2018.40.03.11

Surface Roughness Analysis in High Speed Turning of Ti-6Al-4V Using Coated Carbide Inserts: Experimental and Modeling Studies
G. D’Mello, P. Srinivasa Pai, A. Prashanth
Tribology in Industry, Vol. 40, No. 3, pp. 457-476, 2018
DOI: 10.24874/ti.2018.40.03.12

Synthesis, Characterization and Application by HVOF of a WCCoCr/NiCr Nanocomposite as Protective Coating Against Erosive Wear
W.C. Giaglianoni, M.A. Cunha, C.P. Bergmann, C. Fragassa,
A. Pavlovic
Tribology in Industry, Vol. 40, No. 3, pp. 477-487, 2018
DOI: 10.24874/ti.2018.40.03.13

Tribological and Electrochemical Properties of AISI D3 Steel Coated with Hafnium Carbon Nitride
W. Piedrahita, J.C. Caicedo, W. Aperador
Tribology in Industry, Vol. 40, No. 3, pp. 488-500, 2018
DOI: 10.24874/ti.2018.40.03.14

A Comparative Experimental Study on Fault Diagnosis of Rolling Element Bearing Using Acoustic Emission and Soft Computing Techniques
C. Ratnam, N.M. Jasmin, V.V. Rao, K.V. Rao
Tribology in Industry, Vol. 40, No. 3, pp. 501-513, 2018
DOI: 10.24874/ti.2018.40.03.15


Current Issue


tribology

Volume 46
Number 4
December 2024


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents