headerphoto

Volume 41, No 2, 2019


Contents:

Effect of TiN Nanoparticles on the Friction and Wear Properties of Spark Plasma Sintered Fe-Cr-Ni
M.R. Mphahlele, S.R. Oke, O.O. Ige, O.E. Falodun, P.A. Olubambi
Tribology in Industry, Vol. 41, No. 2, pp. 143-155, 2019
DOI: 10.24874/ti.2019.41.02.01

Wear Resistance Increase of Samples Tribomating in Oil Composite with Geo Modifier KGMF-1
V. Aulin, S. Lysenko, O. Lyashuk, A. Hrinkiv, D. Velykodnyi,
Y. Vovk, D. Holub, A. Chernai
Tribology in Industry, Vol. 41, No. 2, pp. 156-165, 2019
DOI: 10.24874/ti.2019.41.02.02

Friction Forces at the Wheel's Contact with the Ground in a Turning Vehicle
I. Troyanovskaya, A. Ulanov, A. Zhakov, S. Voinash
Tribology in Industry, Vol. 41, No. 2, pp. 166-171, 2019
DOI: 10.24874/ti.2019.41.02.03

Investigation on Tool Wear and Surface Characteristics in Hard turning under Air-Water Jet Spray Impingement Cooling Environment
R. Kumar, A.K. Sahoo, P.C. Mishra, R.K. Das
Tribology in Industry, Vol. 41, No. 2, pp. 172-187, 2019
DOI: 10.24874/ti.2019.41.02.04

Physico-mechanical and Tribological Properties of Fe–Cu–Ni–Sn and Fe–Cu–Ni–Sn–VN Nanocomposites Obtained by Powder Metallurgy Methods
V.A. Mechnik, N.A. Bondarenko, V.M. Kolodnitskyi, V.I. Zakiev, I.M. Zakiev, M. Storchak, S.N. Dub, N.O. Kuzin
Tribology in Industry, Vol. 41, No. 2, pp. 188-198, 2019
DOI: 10.24874/ti.2019.41.02.05

Frictional Study of Al 6061 Red-Mud Composite under the Influence of Different Process Parameters
N. Panwar, S. Saini, A. Chauhan
Tribology in Industry, Vol. 41, No. 2, pp. 199-211, 2019
DOI: 10.24874/ti.2019.41.02.06

The Application of Chitosan as a Modifier for Lubricating Greases Based on Vegetable Oil
R. Kozdrach, J. Skowronski
Tribology in Industry, Vol. 41, No. 2, pp. 212-219, 2019
DOI: 10.24874/ti.2019.41.02.07

Experimental Study on an Influence of Bearing Geometry and TiO2 Nanoparticle Additives on the Performance Characteristics of Fluid Film Lubricated Journal Bearing
S.R. Suryawanshi, J.T. Pattiwar
Tribology in Industry, Vol. 41, No. 2, pp. 220-236, 2019
DOI: 10.24874/ti.2019.41.02.08

Quality of Dynamics of Gas-static Thrust Bearing with Movable Carrying Circle on Elastic Suspension
V. Kodnyanko, A. Kurzakov
Tribology in Industry, Vol. 41, No. 2, pp. 237-241, 2019
DOI: 10.24874/ti.2019.41.02.09

Maximum von Mises Stress in the Sliding Contact of Coated Bodies
S. Spinu
Tribology in Industry, Vol. 41, No. 2, pp. 242-253, 2019
DOI: 10.24874/ti.2019.41.02.10

A Short Review on Frictional Contact Stress Distribution in Involute Gears
S.S. Patil, S. Karuppanan, I. Atanasovska
Tribology in Industry, Vol. 41, No. 2, pp. 254-266, 2019
DOI: 10.24874/ti.2019.41.02.11

Experimental Investigation of Viscosity of Glycerol Based Nanofluids Containing Carbon Nanotubes
G. Bognár a, A. Vencl
Tribology in Industry, Vol. 41, No. 2, pp. 267-273, 2019
DOI: 10.24874/ti.2019.41.02.12

Friction and Wear of Cr-O-N Coatings Characterized by Atomic Force Microscopy
T. Kuznetsova, V. Lapitskaya, S. Chizhik, A.S. Kuprin,
G.N. Tolmachova, V.D. Ovcharenko, A. Gilewicz, O. Lupicka, B.Warcholinski
Tribology in Industry, Vol. 41, No. 2, pp. 274-285, 2019
DOI: 10.24874/ti.2019.41.02.13

Influence of Coating Chemical Composition and Thickness Layer on the Wear Behavior of Cutting Tools a Business Analytics Approach
F. Trigos, D. Maldonado-Cortés, L. Peña-Parás, G.E. García
Tribology in Industry, Vol. 41, No. 2, pp. 286-291, 2019
DOI: 10.24874/ti.2019.41.02.14

The Automated Spectrometric Oil Analysis Decision Taking Procedure as a Tool to Prevent Aircraft Engine Failures
P.S. Dellis
Tribology in Industry, Vol. 41, No. 2, pp. 292-309, 2019
DOI: 10.24874/ti.2019.41.02.15


Current Issue


tribology

Volume 46
Number 4
December 2024


Crossref logo




Announcements


TiI news RSS 2.0

Table of contents