Volume 41, No 3, 2019
Contents:
Fundamental Study on No-lubricating Friction Characteristics Due to Anisotropy of Surface
Properties Applied to Differential Gear
Y. Ebisuno, Y. Sato, M. Fukumoto
Tribology in Industry, Vol. 41, No. 3, pp. 311-320, 2019
DOI: 10.24874/ti.2019.41.03.01
Investigation of Abrasive Wear Performances of Different Polyamides by Response Surface Methodology
Y. Şahin, A. Deniz, F. Şahin
Tribology in Industry, Vol. 41, No. 3, pp. 321-329, 2019
DOI: 10.24874/ti.2019.41.03.02
Influence of the Number of Bilayers on the Mechanical and Tribological Properties in [TiN/TiCrN]n Multilayer Coatings Deposited by Magnetron Sputtering
C.H. Ortiz, H.D. Colorado, W. Aperador, A. Jurado
Tribology in Industry, Vol. 41, No. 3, pp. 330-343, 2019
DOI: 10.24874/ti.2019.41.03.03
Effect of Heat Treatment on Wear behavior of Hybrid Aluminum Metal Matrix Composites
A.M. Rajesh, M.K. Kaleemulla, S. Doddamani
Tribology in Industry, Vol. 41, No. 3, pp. 344-354, 2019
DOI: 10.24874/ti.2019.41.03.04
Studying the Possibility of Using Complex Esters as AW/EP Additives
I. Mukhortov, E. Zadorozhnaya, M. Kandeva, I. Levanov
Tribology in Industry, Vol. 41, No. 3, pp. 355-364, 2019
DOI: 10.24874/ti.2019.41.03.05
The Effect of the Different Percentage of Pour Point Depressant (PPD) On the Tribological Properties of
Palm Kernel Oil
M.A. Dandan, A. Yahaya, S. Syahrullail
Tribology in Industry, Vol. 41, No. 3, pp. 365-374, 2019
DOI: 10.24874/ti.2019.41.03.06
Study of Mechanical and Sliding Wear Behavior of
Al-25Zn alloy/SiC/Graphite Novel Hybrid Composites
for Plain Bearing Application
P.P. Ritapure, Y.R. Kharde
Tribology in Industry, Vol. 41, No. 3, pp. 375-386, 2019
DOI: 10.24874/ti.2019.41.03.07
Visualization of Lubrication Film in Model of Synovial Joint
P. Čípek, D. Rebenda, D. Nečas, M. Vrbka, I. Křupka, M. Hartl
Tribology in Industry, Vol. 41, No. 3, pp. 387-393, 2019
DOI: 10.24874/ti.2019.41.03.08
Corrosion Rate and Wear Mechanisms Comparison for
Aisi 410 Stainles Steel Exposed to Pure Corrosion and Abrasion-corrosion in a Simulated Marine Environment
G.A. Rodríguez-Bravo, M. Vite-Torres, J.G. Godínez-Salcedo
Tribology in Industry, Vol. 41, No. 3, pp. 394-400, 2019
DOI: 10.24874/ti.2019.41.03.09
Hydrodynamic Lubrication of Textured Journal Bearing Considering Slippage: Two-dimensional CFD Analysis Using Multiphase Cavitation Model
M. Tauviqirrahman, A. Pratama, Jamari, Muchammad
Tribology in Industry, Vol. 41, No. 3, pp. 401-415, 2019
DOI: 10.24874/ti.2019.41.03.10
Three Body Abrasive Wear Behavior of Glass-Basalt PA66/PTFE Hybrid Composites in Multi pass Condition
B.M. Rudresh, B.N. Ravikumar, D. Madhu, B.V. Lingesh
Tribology in Industry, Vol. 41, No. 3, pp. 416-425, 2019
DOI: 10.24874/ti.2019.41.03.11
Ferrofluid Flow in the Presence of Magnetic Field Above Stretching Sheet
G. Bognár, K. Hriczó, B. Stojanović, Sz. Szávai
Tribology in Industry, Vol. 41, No. 3, pp. 426-432, 2019
DOI: 10.24874/ti.2019.41.03.12
Optimization of the Vibration Isolation Performance of
an Impact-testing Machine Using Multi-walled Carbon Nanotubes Reinforced Elastomeric Machine Mounts
K. Tsongas, G. Mansour
Tribology in Industry, Vol. 41, No. 3, pp. 433-442, 2019
DOI: 10.24874/ti.2019.41.03.13
Electroless Nickel Copper Metallization as a Reinforcing Approach for Sintered Aluminium Metal Matrix Composites
V. Kamburov, R. Dimitrova, A. Nikolov, M. Kandeva, S. Valkanov
Tribology in Industry, Vol. 41, No. 3, pp. 443-451, 2019
DOI: 10.24874/ti.2019.41.03.14
Characterization of the Tribological Properties of Bismuth-titanate Coatings Synthesized by Sol-gel
on 316L Stainless Steel Substrates
J. Bautista-Ruiz, A. Chaparro, J.J. Olaya
Tribology in Industry, Vol. 41, No. 3, pp. 452-462, 2019
DOI: 10.24874/ti.2019.41.03.15
