Volume 41, No 4, 2019
Contents:
Tribological Behavior of Thermally Sprayed Coatings
with Different Chemical Composition and Modified by Remelting
E. Zdravecká, M. Ondáč, J. Tkáčová
Tribology in Industry, Vol. 41, No. 4, pp. 463-470, 2019
DOI: 10.24874/ti.2019.41.04.01
Oil Film Thickness Measurements Combined with High Temperature Friction Investigations in a Simplified Piston-Ring Lubrication Test Rig
P.S. Dellis
Tribology in Industry, Vol. 41, No. 4, pp. 471-483, 2019
DOI: 10.24874/ti.2019.41.04.02
Influence of Substrate Bias Voltage on Structure, Morphology and Mechanical Properties of AlCrN Coatings Synthesized Using Cathodic Arc Evaporation
A. Gilewicz, R. Jedrzejewski, P. Myslinski, B. Warcholinski
Tribology in Industry, Vol. 41, No. 4, pp. 484-497, 2019
DOI: 10.24874/ti.2019.41.04.03
Effect of Load, Sintering Temperature and Reinforcement Concentration on Al-Si/γ-Al2O3/GNP Self-Lubricating Hybrid Composite
P.D. Srivyas, M.S. Charoo
Tribology in Industry, Vol. 41, No. 4, pp. 498-515, 2019
DOI: 10.24874/ti.2019.41.04.04
Effect of Nitrile Butadiene Rubber (NBR) on Mechanical and Tribological Properties of Composite Friction Brakes
E. Surojo, D. Ariawan, R. Arsada, N. Muhayat, W.W. Raharjo,
D.F. Smaradhana
Tribology in Industry, Vol. 41, No. 4, pp. 516-525, 2019
DOI: 10.24874/ti.2019.41.04.05
Method of Accelerated Testing of Crankshaft Shells of the Combustion Engine in the Operating Process
O. Grytsyuk, O. Vrublevskyi
Tribology in Industry, Vol. 41, No. 4, pp. 526-536, 2019
DOI: 10.24874/ti.2019.41.04.06
Experimental Studies on Mechanical and Wear Behaviour of TiC Reinforced Cu-Sn-Ni Functionally Graded Composite
N. Radhika, M. Sam, S. Thirumalini
Tribology in Industry, Vol. 41, No. 4, pp. 537-547, 2019
DOI: 10.24874/ti.2019.41.04.07
Determination of the Rational Composition of the Additive to Oil with the Use of the Katerynivka Friction Geo Modifier
V. Aulin, O. Lyashuk, A. Hrynkiv, S. Lysenko, T. Zamota, Y. Vovk, A. Pankov, A. Tykhyi, A. Horkunenko
Tribology in Industry, Vol. 41, No. 4, pp. 548-562, 2019
DOI: 10.24874/ti.2019.41.04.08
Mechanical and Tribological Analysis of Anodized AZ31 Magnesium Alloy as a Function of a Cement Concrete Environment
J.C. Caicedo, S. Quiñonez, W. Aperador
Tribology in Industry, Vol. 41, No. 4, pp. 563-572, 2019
DOI: 10.24874/ti.2019.41.04.09
Effect of Sintering Temperature and Reinforcement Concentration on the Tribological Behaviors of Hybrid Aluminum Matrix Nano Composite
P.D. Srivyas, M.S. Charoo
Tribology in Industry, Vol. 41, No. 4, pp. 573-591, 2019
DOI: 10.24874/ti.2019.41.04.10
Parameters of Internal Combustion Engine Efficiency While Introducing Additives in the Oil
A. Gritsenko, E. Zadorozhnaya, V. Shepelev, I. Gimaltdinov
Tribology in Industry, Vol. 41, No. 4, pp. 592-603, 2019
DOI: 10.24874/ti.2019.41.04.11
Investigating the Adhesive Wear Properties of Aluminum Hybrid Metal Matrix Composites at Elevated Temperatures Using RSM Technique
C. Aravind, S. Gopalakrishnan , N. Radhika
Tribology in Industry, Vol. 41, No. 4, pp. 604-612, 2019
DOI: 10.24874/ti.2019.41.04.12
Wear Characteristics of Recycled Cast Al-6Si-3Cu Alloys
F.M. Mwema, J.O. Obiko, T. Leso, T.O. Mbuya, B.R. Mose,
E.T. Akinlabi
Tribology in Industry, Vol. 41, No. 4, pp. 613-621, 2019
DOI: 10.24874/ti.2019.41.04.13
Mechanical and Tribological Behavior of Woven Sisal Fabric
M. Nagamadhu, P. Jeyaraj, G.C. Mohan Kumar
Tribology in Industry, Vol. 41, No. 4, pp. 622-633, 2019
DOI: 10.24874/ti.2019.41.04.14
Evaluation of the Surface Roughness of Ti-6Al-4V for Surface Grinding under Different Cooling Methods Using Conventional and Vegetable Oil-based Cutting Fluids
K.N. Ronoh, N.W. Karuri, F.M. Mwema, H.T. Ngetha, S.A. Akinlabi, E.T. Akinlabi
Tribology in Industry, Vol. 41, No. 4, pp. 634-647, 2019
DOI: 10.24874/ti.2019.41.04.15
